A Guide to Rustproofing After Auto Detailing Training
Rust occurs when alloys are exposed to moisture and oxygen for extended periods. Salt is also one of the leading causes of rust when its chemicals come in contact with iron.
Unfortunately, vehicles in Canada are regularly exposed to these elements, particularly during the winter. This perhaps explains why rustproofing is one of the most requested services in auto detailing shops.
It stands to reason that you may be required to rustproof a customer’s vehicle soon after you complete your auto detailing training. Ensure you’re never caught unprepared by learning and perfecting the tips detailed in this guide.
You’ll Learn To Wax & Wash Cars In Auto Detailing Training
Waxing a car is effective at protecting it from rust damage. It’s also relatively inexpensive, which makes it accessible to the majority of car owners. Best of all, it doesn’t require too much technical skill, making it a great launchpad for your professional detailing career.
The first thing to do is to get the vehicle cleaned up. Rustproofing a dirty car is ineffective at best and counterproductive at worst. Try to remove as much surface dirt as possible by spraying down the vehicle first, then washing it down with a towel. You’ll be calling up all the things you will learn during your auto detailing training.
As soon as that’s done, move on to applying the wax. Use a clean towel and wipe down the vehicle in circular, clockwise motions. Allow about 10 minutes for the wax to set up, then wipe down the vehicle again.
Apply Ceramic Coating
Another rustproofing technique you will master in auto detailing school is the application of a ceramic coating to vehicles. It’s one of the most widely used methods and is quite straightforward.
Ceramic coating is similar to waxing in a lot of ways. The main point of difference between both methods is that ceramic coating prevents salt and dirt from clinging to the vehicle. It also leaves the vehicle with a brighter sheen.
The steps for applying a ceramic coat are similar to those for waxing. Simply clean the vehicle, apply the coat, then leave it to set for a few minutes. Finally, wash down the vehicle to get rid of excess residue.
Wrap the Vehicle
Customers that want a professional, high-class rustproofing job done on their vehicles may request a vehicle wrap. This is one of the most painstaking rustproofing techniques available, but one that experienced auto body shop operators with the right training can take on.
Start by giving the vehicle a deep cleaning. Make sure to remove all traces of grease or wax on the body or underneath the vehicle. Next, apply the wrap, making sure that it seals tightly. This will prevent moisture from seeping through any crack.
Eager to explore our range of auto careers?
Contact ATC Montreal for more information.
